Produce rubber components with high elongation at break and Shore 65A hardness using this mid-tear strength, high elongation at break, and Shore 65A hardness material.
BUY GET A QUOTE
Produce rubber components with high elongation at break and Shore 65A hardness using this mid-tear strength, high elongation at break, and Shore 65A hardness material.
BUY GET A QUOTE
Figure 4 RUBBER-65A BLK Is A Material With A Moderate Tear Strength That Is Ideal For The Fabrication Of Medium-Hard Rubber Parts With A Stagnant Rebound, Such As Grips, Handles, Gaskets, Bumpers, Seals, And Vibration Dampening Components.
Where relevant, the complete set of mechanical characteristics is provided in accordance with ASTM and ISO standards. All components are conditioned for a minimum of 40 hours at 23 °C and 50% relative humidity in accordance with ASTM recommendations. Physical and mechanical qualities, as well as thermal, UL flammability, and electrical properties, are all included in material properties (dielectric strength, dielectric constant, dissipation factor, and volume resistivity).
Figure 4 technology creates isotropic components, which means that items printed along either the XYZ or Z axis will have equivalent mechanical qualities. Because parts do not need to be orientated to provide the best mechanical characteristics, the degree of freedom for part orientation for mechanical qualities is increased.
